0,00
(frakt: 0,00)
Kolink KLM-002, Micro Tower, PC, Plastikk, Stål, Svart, Micro ATX,Micro-ITX, Hjem / Kontor
Varenr.: [8478953] | Producent: Kolink International | Model-nr.: KLM-002 | EAN: 5999094003293
Lager
På lager, bestill innen kl. 12:00 så sender vi det samme dag (hverdager). Mere info
Frakt 75,00 - Bring - Hentes på Posten.
Se alle alternativer
| Bring - Hentes på Posten | 75,00 |
| Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer) | 199,00 |
Lagerkampanje
Det er 1 på lager
Den aktuelle pris gælder kun så længe lokalt lager haves
NOK
623,00
eksklusiv MVA 498,40
Totalt inkl. frakt
698,00
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Opprett bruker
Login
Opprett bruker
Login
Send på mail
Kolink is expanding their range of cases with the addition of a new, compact, as well as high-performance case that is designed for use in schools as well as offices. Get ready for the Micro-ATX KLM-002: in terms of pure flexibility bearing in mind the dimensions, this case is a force to be reckoned with. Depending on your space requirements, the case is designed for horizontal or vertical use. The interior allows for up to three 2.5" drives to be installed. A pre-installed 80mm fan helps ensure more than adequate cooling.
Kolink KLM-002: The Compact Case for Schools and Offices
With a height/width of just 9.5cm the Kolink KLM-002 is exceptionally compact and can be set to the orientation you prefer depending on the space available with the help of an included stand. All told, this makes the KLM-002 an outstanding choice for use in spaces with large numbers of systems such as offices and schools. Despite the compact dimensions however, the KLM-002 is built to support a large amount of hardware regardless.
The case supports Micro-ATX- and Mini-ITX form factor motherboards. As for graphics cards, 9.5cm of space is available, although the case is ideally suited for use with CPUs that include and integrated GPU. If you do require the extra gaming horsepower however, a low-profile GPU with a max length of approx. 150mm can be installed.
Hard Drives & SFX Power Supply Support
With air vents on the back, sides and roof, the case is designed from the ground up with airflow in mind, helped by the presence of a pre-installed 80mm fan. On the interior, a total of three 2.5" drives can be installed, and alternatively a 3.5"- and a 2.5" drive are also supported. A compact SFX-form factor power supply is required due to the dimensions of the case, this points outwards from the bottom of the case when set vertically. An angled kettle cable must be used so that the cable can be guided out towards the rear.
Functionality aside, the appearance of the KLM-002 cuts no corners either. The front has the appearance of brushed aluminium. The I/O panel is also located on the front, offerings a USB 3.0- and two USB 2.0 ports. Two 3.5" jacks for headphones and microphones are available. The power switch is mounted to the side along the edge of the case's front cover.
Kolink KLM-002: The Compact Case for Schools and Offices
With a height/width of just 9.5cm the Kolink KLM-002 is exceptionally compact and can be set to the orientation you prefer depending on the space available with the help of an included stand. All told, this makes the KLM-002 an outstanding choice for use in spaces with large numbers of systems such as offices and schools. Despite the compact dimensions however, the KLM-002 is built to support a large amount of hardware regardless.
The case supports Micro-ATX- and Mini-ITX form factor motherboards. As for graphics cards, 9.5cm of space is available, although the case is ideally suited for use with CPUs that include and integrated GPU. If you do require the extra gaming horsepower however, a low-profile GPU with a max length of approx. 150mm can be installed.
Hard Drives & SFX Power Supply Support
With air vents on the back, sides and roof, the case is designed from the ground up with airflow in mind, helped by the presence of a pre-installed 80mm fan. On the interior, a total of three 2.5" drives can be installed, and alternatively a 3.5"- and a 2.5" drive are also supported. A compact SFX-form factor power supply is required due to the dimensions of the case, this points outwards from the bottom of the case when set vertically. An angled kettle cable must be used so that the cable can be guided out towards the rear.
Functionality aside, the appearance of the KLM-002 cuts no corners either. The front has the appearance of brushed aluminium. The I/O panel is also located on the front, offerings a USB 3.0- and two USB 2.0 ports. Two 3.5" jacks for headphones and microphones are available. The power switch is mounted to the side along the edge of the case's front cover.