0,00
(frakt: 0,00)
Yato 36980 - HAND CUTTING SYSTEM WITH CONNECTABLE GUIDE - Op to max 320Ccm
Varenr.: [9535316] | Producent: YATO | Model-nr.: YT-36980 | EAN: 5906083071713
Fjernlager
Varen er på fjernlager, leveringstiden er 4-7 hverdager. Mere info
Frakt 25,00 med Bring - Hjemlevering - Levering til døren på hverdager
Se alle alternativer
| Bring - Hjemlevering - Levering til døren på hverdager mellom 08:00-16:00 | 25,00 |
| Bring - Fleksibel hjemlevering - Levering til døren (om kvelden i større byer) | 125,00 |
NOK
2.657,00
eksklusiv MVA 2.125,60
Totalt inkl. frakt
2.682,00
Denne funksjonen krever at man er logget inn. Opprett en bruker og liste systemet for å holde styr på fremtidige kjøp eller ønskelister.
Opprett bruker
Login
Opprett bruker
Login
Send på mail
Cutting machine for ceramic plates with a length of up to about 320 cm. The set includes:
three rails - guides made of aluminum
four mounting suction cups that are connectors of the rails
one nó¿ on four rollers to guide along the guide.
The set includes hand pliers for breaking the notched plate and a wide handle for breaking larger sections of the plate. The set is packaged in a bag - a case made of thick nylon.
The cutting element is a 22 mm diameter ball-bearing forked kóblade. It can be pressed by the operator against the material while cutting. The cutter is designed for cutting large ceramic tiles with a thickness of 3 to 8 mm. Maximum cutting length of about 320 cm.
Use
depending on the size of the slab to be cut, we mount one, two or a combination of three guides on the surface of the slab.
to the guide mounted on the suction cups, we attach the wózek with the cutting unit
sliding it along the guide, we press with sensitivity to the surface of the plate obtaining the required cut
breaking is done with the included pliers or breaker
three rails - guides made of aluminum
four mounting suction cups that are connectors of the rails
one nó¿ on four rollers to guide along the guide.
The set includes hand pliers for breaking the notched plate and a wide handle for breaking larger sections of the plate. The set is packaged in a bag - a case made of thick nylon.
The cutting element is a 22 mm diameter ball-bearing forked kóblade. It can be pressed by the operator against the material while cutting. The cutter is designed for cutting large ceramic tiles with a thickness of 3 to 8 mm. Maximum cutting length of about 320 cm.
Use
depending on the size of the slab to be cut, we mount one, two or a combination of three guides on the surface of the slab.
to the guide mounted on the suction cups, we attach the wózek with the cutting unit
sliding it along the guide, we press with sensitivity to the surface of the plate obtaining the required cut
breaking is done with the included pliers or breaker